Why Choose Our Can Filling Machine
- Can be filled with various liquids, solids, and powders
- Filling speed range is 30-100BPM
- Filling accuracy up to ±0.2%
- Customizable sizes and components
- Passed ISO 9001, FDA, CE, and other certifications
Best Can Filling Machine Manufacturer
A filling machine that fills a can of material at once. Simply set the program, and every other refill and capping will automatically follow suit. This machine performs different types of filling to fill liquids, powders, pastes, and solid materials.
SaintyCo is a can filling machine manufacturer in China. Our filling machines are not standard, but exclusive can fillers produced specifically to meet your requirements. And basically, with regards to drive mode, we have three different drive modes: electrical, pneumatic, and hydraulic. According to the filling material, selecting a liquid filling machine, a solid filling machine, a powder or paste filling machine, and so on. Your production volume will determine the filling speed and number of filling heads. Our can filler machines offer excellent precision, high filling rates, and reliability to keep your factory running automatically.
Some of the typical problems when it comes to using online filling machines have been covered by us as well. Problems occur like the filing volume is not accurate, positioning is inaccurate, the filling head is blocked, or dripping. We kept on iterating and fixing all these issues via multiple experiments, and are one hundred percent fixed. The exact solutions will be discussed in the upcoming section.
With this in mind, you can envision that with our can filling machine, not only will equipment stoppage be avoided, but production capacity and earnings will be further increased. What are you waiting for? Contact us today for a quote!
Various Types of Can Filling Machines We Provide
A filling machine that controls the liquid level by overflow to ensure a consistent liquid level. It has high precision and good airtightness and is often used in cosmetics or high-end liquid products. Its filling speed is between 30 and 100 BPM.
A filling machine that uses a piston or pump to extract a fixed volume of material for filling. Its filling head is made of FDA-approved 316 stainless steel and can be used to fill a variety of liquids, solids, and powders. Its filling speed ranges from 30 to 100 BPM.
A filling machine that extracts gas from the tank to create negative pressure, thereby drawing liquid into the container. It has good airtightness and is often used to fill liquids that are easily oxidized or contain carbon dioxide. Its filling speed is between 8 and 20 BPM.
A filling machine that applies pressure to liquids through pneumatics, forcing them into containers. It is made of FDA-certified stainless steel and is commonly used for filling medium-viscosity liquids such as sauces and jams. Its filling speed is between 30 and 100 BPM.
A filling machine that uses the liquid’s gravity for filling. It does not require additional pressurization, so its energy consumption is low. This filling machine has passed CE certification and is commonly used for filling low-viscosity liquids such as water and juice. Its filling speed is between 40 and 60 BPM.
A filling machine that extracts liquid for filling through the reciprocating motion of the piston. The capacity of the piston is the amount of liquid it pumps. It is made of FDA-certified stainless steel and is commonly used for filling thick liquids such as sauces and creams. Its filling speed is between 48 and 60 BPM.
A filling machine that uses a gravity sensor to weigh the material to ensure that the weight of the material filled each time is equal. This filling machine has passed CE certification and is commonly used to fill materials with unstable density, such as solid particles and powders. Its filling speed is between 30 and 100 BPM.
A filling machine that compresses a hose through gears, creating a partial vacuum inside the hose, thereby extracting liquid for filling. Its pump body will not come into contact with the material, ensuring the hygiene of the material. This filling machine has passed GMP certification and is commonly used for filling sterile drugs. Its filling speed ranges from 30 to 100 BPM.
Can Filling Machines for Different Materials
Solid Filling Machine
Paste Filling Machine
Liquid Filling Machine
Powder Filling Machine
Advantages of Our Can Filling Machine
Our can filling machine uses a servo motor and a laser centering device to determine the position of the filling port, and a high-precision weight sensor or flow meter to ensure filling accuracy.
Our can filling machine adopts a mature control system and precision parts. Its various links work well together, with a low failure rate and good reliability. Its filling qualification rate is greater than 99.5%.
The maintenance cycle of our can filling machine is up to 12,000 hours. It uses a lightweight star wheel guide structure, which can be quickly replaced and simplifies the maintenance process.
Our can filling machine uses a large-sized touch screen. Its control interface is simple and easy to understand. Even a novice with no prior knowledge of operation can get started after simple training.
Our canning machines can fill cans of various shapes. You can choose a single filling head or multiple filling heads to adjust the filling volume to suit containers of different volumes and various materials.
We use FDA and CE certified 316 stainless steel to manufacture filling heads, machine bodies, shells, and other components. It also uses CIP cleaning and SIP sterilization systems, which can effectively inhibit bacterial growth.
Our can filling machine uses a PLC control system and an operation screen. You only need to set the program and various parameters in advance, and then turn on the switch to achieve fully automatic filling.
The liquid tank will fill the liquid to a higher temperature, which can solve the problem of using water to cool the machine. Thus, the power of it is much smaller than that of the filling equipment.
Wide Applications of Our Can Filling Machine
Our can filling machines can be used to fill a variety of liquids, solids, powders, and pastes. The following are some common fillable materials.
- Beverages: Mineral water, tea, juice, carbonated drinks
- Food: Nutritional powders, puffed foods, nuts, candy
- Sauces: Honey, ketchup, jam, salad dressing
- Condiments: Soy sauce, cooking oil, vinegar, cooking wine
- Household chemicals: Shampoo, hand soap, shower gel, hand cream, lotion, perfume
- Chemicals: Lubricants, cutting oil, brake fluid, corrosive liquids
- Liquid medications: Oral solution, hydrogen peroxide, alcohol, eye drops
Parts of Our Can Filling Machine
Our can filling machine adopts a modular design and consists of multiple parts. The following are some of its core components.
- Control system: PLC, sensors, HMI
- Filling head assembly: seal ring, discharge nozzle, lifting mechanism
- Conveyor system: bottle inlet and outlet conveyor, bottle stop mechanism
- Power unit: servo motor/pneumatic system
- Positioning and guiding device: laser centering device, bottle neck locator
- Metering and filling module: dynamic weighing platform, piston chamber, vacuum pump
How do we solve The Common Problems of The Can Filling Machine?
Via the use of dynamic weighing sensors or high-precision flow meters, we can real-time adjust the filling volume to guarantee precision.
The pipeline is brushed with the CIP system to avoid blockages in the filling head.
A servo-motor moves the position of the Conveyor belt in real-time, and a laser centering device gives an accuracy level that is ±0.1mm from the filling head to the opening of the container.
We use PTFE main seal ring, fluororubber secondary seal ring, and negative pressure back suction technology to prevent the filling head from dripping.
We use CE and FDA-certified stainless steel to manufacture various parts of the filling machine. We also use a three-dimensional rotating spray ball, combined with alkaline washing, acid washing, and steam sterilization processes, to reduce the enrichment of microorganisms and ensure the hygiene of the filling process.
Related Products
Gravity Filling Machine
Piston Filling Machine
Monoblock Filling Machine
Quantitative Filling Machine
Filling Machine production time: 35-65 days. The transportation depends on your freight way and the distance from the filling machine to your destination.
Our can filler machine is ISO9001, FDA, CE & GMP certified.
The above drive mode freely changes, nozzle shape/ size select, filling head number / high speed adjust / appearance, etc., the size of which can be customized.