All over the world, gummy bears are melted for different reasons or purposes. Unlike softening gummy bears, the melting process is slightly different.
But here is the secret – once you have the right equipment, melting gummy bear is so straightforward. Let’s explore each step:
1. Prepare the Right Materials and Tools
Prior to beginning the process of melting gummy bears, gathering or preparing the right materials and tools is necessary. You will need to prepare the following:
- Gummy bears
- Heat-safe spoon
- Microwave-safe bowl
- Paper towels
2. Choose the Method that Works for You
You can melt gummy bears in two unique ways. They are the microwave and stovetop methods. Knowing this, you have to decide what will work for you. The two methods are
· Using the Microwave
Using the microwave to melt gummy bears is very fast. Also, it is easy to do and will keep the process simple. You just need to be more cautious to ensure you do not burn the gummies.
· Using the Stovetop
Stovetop melting offers you a lot more control where heat is concerned. Again, it is perfect if you want to melt a lot of gummy bears. You can decide to use the double boiler or direct low heat procedures.
3. Get your Gummy Bears Ready
Before you melt gummy bears, you must prepare them and ensure you know the general ingredients composition. Among the most critical steps here are:
· Measure the amount of Gummy Bears to Use
Your choice of the number of gummy bears will be based on the quantity of melted gummies you need. At the same time, it will depend on the intended use and objectives.
Remember, the quantity you choose will depend on the melting capability.
· Group into Identical Colors
Based on your specific need for melted gummies, you might want to consider separating them. For instance, you may melt red gummies, yellow gummies or white gummies separately.
Alternatively, you can also melt gummy bears without separating the colors. This can also work.
· Cut into Sizable Pieces
You will enjoy melting gummies when you have them cut into smaller sizes. Again, this will also depend on the available space in your gummy bear melting equipment.
4. Set Aside Your Melting Pans and Bowls
If you will be using a microwave, a microwave-safe bowl is what you will need. Set it aside, grease it with some oil or nonstick spray.
Alternatively, if your choice is stovetop, a nonstick saucepan or a heat-safe bowl will work best. A heat-safe scraper or spoon will also help.
Now, let’s explore what happens in every stage:
· Microwave Melting Process
Step 1: Pour gummies into your set Aside bowl.
Step 2: For a minimum of 10 seconds and maximum of 15 seconds, heat the bowl on medium power.
Step 3: Take the bowl out from the microwave and stir your gummy bears.
Step 4: Put them back in when the bowl starts to get cold and there are some gummies left that did not melt.
Step 5: Do this till all gummy bears are melted.
You need to be extremely careful to ensure there are no issues with gummies getting overly burnt. It interfere with their uniqueness and makes them useless.
· Stovetop Melting Process
Since this process comes with two different procedures, you can choose one that suits you. Depending on the gummies you wish to melt using the stovetop technique, you can choose:
· Direct Low Heat Melting Process
Step 1: Pour all gummy beats into your nonstick saucepan and have them well arranged.
Step 2: Put the saucepan on the stove and turn the fire on but make it very low.
Step 3: Start to stir to prevent it from sticking.
Step 4: Continue to stir till all gummy bears are melted.
Step 5: When you are sure all gummy bears have been melted, turn the fire off. Then, carry the saucepan from the stove as well.
· Double Boiler Melting Process
Step 1: To begin, fill the bottom of your double boiler with some water. A maximum of 2 inches is ideal.
Step 2: Allow the water to warm a bit.
Step 3: Put a heat-safe bowl on top of the boiler. Make sure it doesn’t touch the water.
Step 4: Add your gummy bears.
Step 5: Stir steadily watching the gummies melt one by one.
Step 6: Carry it from the heat once all gummies are melted.
5. Cleaning
After melting gummy bears, it is important to keep your equipment clean. You can soak, or use warm to remove hard stains. This is critical when you melt gummies frequently.
Conclusion
Melting gummies can be very easy, however you can only achieve this when you choose a good technique and follow the recommended process. Remember, both stovetop and microwave melting technique are very effective.
At SaintyCo, we design and manufacturer a wide range of gummy machine and production line, optimized to suit your specific production needs – for inquiries, contact us now.
